這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player

這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player

 
 
 
Solar LED Light Vent
Solar Air Purifier
Solar Extractor Ventilators
auto Air Cooler
Fridge Fan
Solar Car Battery Maintainer
Solar Batteries
Solar Wall Fan
SOLAR WARNING LIGHT
 
 
Solar Extractor Ventilators
 
 SVT-012 Solar Extractor Ventilators

Product ID:
SVT-012, SVT-012S, SVT-212S, SVT-012SM


Solar Extractor Ventilators

SUNVENT is a new breakthrough in technology, an extractor ventilator powered by sunlight, ambient lights, no battery, no electricity nor any other man made power source. No wirings, no plugs, no noise, and once installed no running cost whatsoever.

Features:

  • Fully automatic operation powered by solar energy.
  • Avoid heat build-up at an area being ventilated.
  • Prevent mold, condensation, mildew, musty odors, damp, etc.
  • Moves 11.6 cubic feet of air per minute.
  • Water resistant, no-noise, safe and pollution free.
  • Two years limited warranty.
  • Easy installation.

    Application:

    For caravans, boats, green houses, RVs, trucks, lories, vans, offices, home conservations, kitchens or bathroom substation. Lofts, house boxes, stables farm building, unoccupied holiday homes, temporary sites, telephone boxes, and many others.

Model No. Construction Weight
SVT-012   ABS Plastic Cowl + Clear Top Lens 365gm
SVT-012S Stainless Steel Cowl + Clear Top Lens 485gm
SVT-212S Stainless Steel Cowl + Lo Vent + Overflow Preventer 410gm
SVT-012SM Stainless Steel Cowl + Lens Top + Overflow Preventer 495gm

 
 SVT-024 Day & Night Solar Vent/Fan

Product ID:
SVT-024, SVT-024S, SVT-224S


Day & Night Solar Vent/Fan

SUNVENT is a new breakthrough in technology, an extractor ventilator powered by sunlight, ambient lights, no battery, no electricity nor any other man made power source. No wirings, no plugs, no noise, and once installed no running cost whatsoever.
With high quality Ni-MH rechargeable battery and on/off switch


Specifications:


  • SVT-024 and SVT-024S models are with concentrator lens top
  • SVT-224S Lo profile vent good for boat deck use
  • Interchangeable intake and exhaust fans
  • Notes: The top part of SVT-024, SVT-024S and SVT-224S are the same as SVT-012, SVT-012S and SVT-224S. The difference between these two models is in their structural design, as explained below

    • Intake and exhaust fan blade


      • This SUNVENT model comes with two fan blades: intake and exhaust, intake fan blade is labeled "INTAKE"
      • To exchange fan blade, simply pull the existing blade off and insert / push the new one. Care must be taken in pushing or pulling the fan blade so as not to bend the motor shaft; otherwise, its performance would be grossly affected
      • If you have only one vent installed on your boat, we recommend using only the exhaust fan blade. If you have multiple vents, try different configurations of intake and exhaust to achieve effective cross flow ventilation


    • Shut-off Bottom Cover: These models of SUNVENT are equipped with bottom cover to shut-off from below. When not in use, it is advisable that one covers the fan outlet with bottom cover.
    • Buyer's Guide

      • Boat Size: Recommended ventilator use
      • Up to 24 ft: 1 exhaust vent
      • Up to 40 ft: 1 exhaust vent and 1 intake vent
      • From 40 ft or larger: 2 exhaust vent and 1 intake vent



    Features:



    • Installation Procedure

      • Installed on glass:


        • SUNVENT could be installed onto glass surface. However, as much as possible it should be installed facing the sun equator.
        • Installation accessories are included in this package, all you need is just a glasscutter.


      • Installed on boat deck / caravan roof:

        • For additional fixing, insert no. 6 screws through the eyelets; it is recommended to use screws made of brass or stainless where salt water is involved.
        • Use suitable mastic to seal the area between plastic ventilator and the surface of installation.
        • For installation purposes, a tubular extension can be use as shown on the right picture.


      • Installed on wall:

        • SUNVENT could be installed unto walls or other materials with a thickness greater than 40mm (1 & 9/16 inches).
        • Through the eyelets insert no. 6 screw along with suitable raw plugs. Use tubular with a diameter of 116 ~ 120mm cut required length. 
 
 SVT-015 Multi-function Solar Vent/Fan
Product ID:
SVT-015, SVT-015S , SVT-215S

Multi-function Solar Vent/Fan

SUNVENT is a new breakthrough in technology, an extractor ventilator powered by sunlight, ambient lights, no battery, no electricity nor any other man made power source. No wirings, no plugs, no noise, and once installed no running cost whatsoever.


Specifications:


  • SVT-015 and SVT-015S models are with concentrator lens top
  • SVT-215S Lo profile vent good for boat deck use
  • Interchangeable intake and exhaust fans
  • Notes: The top part of SVT-015, SVT-105S and SVT-215S are the same as SVT-012, SVT-102S and SVT-212S. The difference between these two models is in their structural design, as explained below

    • Intake and exhaust fan blade

      • This SUNVENT model comes with two fan blades: intake and exhaust, intake fan blade is labeled "INTAKE"
      • To exchange fan blade, simply pull the existing blade off and insert / push the new one. Care must be taken in pushing or pulling the fan blade so as not to bend the motor shaft; otherwise, its performance would be grossly affected
      • If you have only one vent installed on your boat, we recommend using only the exhaust fan blade. If you have multiple vents, try different configurations of intake and exhaust to achieve effective cross flow ventilation


    • Shut-off Bottom Cover: These models of SUNVENT are equipped with bottom cover to shut-off from below. When not in use, it is advisable that one covers the fan outlet with bottom cover.
    • Buyer's Guide

      • Boat Size: Recommended ventilator use
      • Up to 24 ft: 1 exhaust vent
      • Up to 40 ft: 1 exhaust vent and 1 intake vent
      • From 40 ft or larger: 2 exhaust vent and 1 intake vent



    Features:


    • Installation Procedure

      • Installed on glass:

        • SUNVENT could be installed onto glass surface. However, as much as possible it should be installed facing the sun equator.
        • Installation accessories are included in this package, all you need is just a glasscutter.


      • Installed on boat deck / caravan roof:

        • For additional fixing, insert no. 6 screws through the eyelets; it is recommended to use screws made of brass or stainless where salt water is involved.
        • Use suitable mastic to seal the area between plastic ventilator and the surface of installation.
        • For installation purposes, a tubular extension can be use as shown on the right picture.


      • Installed on wall:

        • SUNVENT could be installed unto walls or other materials with a thickness greater than 40mm (1 & 9/16 inches).
        • Through the eyelets insert no. 6 screw along with suitable raw plugs. Use tubular with a diameter of 116 ~ 120mm cut required length.
 
 Mini Solar Vents
Product ID:
SVT-011, SVT-011S, SVT-211S

Mini-Solar Vents

SUNVENT is a new breakthru in technology, an extractor ventilator powered by sunlight, ambient lights, with no battery, no electricity, and no other man-made power source. No wiring, no plugs, no noise, and once installed, no running cost whatsoever.
Function: Prevents condensation, mildew, musty odurs damp etc. Avoids heat built-up at area being ventilated.

Features:



Models Description Dimensions Weight:
SVT-011   ABS Plastic Cowl+ Clear Lens Top All Over Diameter - 260mm 365gm
SVT-011S Stainless Steel Cowl + Clear Lens Top Top Height - 50mm (012) 485gm
SVT-211S Stainless Steel Cowl + Flat PC Top, Lo Vent 36mm (212) 410gm



  • Fan Capacity:

    • Each will extract 6.3 cuft/min of air under full sun.
      Good for hole Diameter of 92mm (Min)


  • Applications:

    • Caravans, Boats, Green Houses, RVs, Trucks, Lorries, Vans, Offices, Home Conservations, Kitchens, or Bathroom Substations. Lofts, Horse Boxes, Stables Farming Building, Unoccupied Holiday Homes, Telephone Boxes, and many others.

 
 Solar Extractor Ventilators - Extending Sleeve
Product ID: Optional Spare Part for Solar Ventilators

Extending Sleeve

We have developed the component for all our solar roof vent and solar lo vent, the extending sleeve for user who needs to extend the bottom of these ventilators in order to install it with a longer sleeve under it.

The Extending Sleeve is made of ABS Plastic. It can be connected in series to further extend the length of bottom sleeve. We this sleeve as an optional components for all our solar ventilators for models of SVT-012, SVT-012S, SVT-212S, SVT-015, SVT-015S and SVT-215S.

 

 
 

旭辰電子有限公司SOLATRON INCORPORATED 版權所有 c 2010 Taiwan All Rights Reserved
Address: No. 106, Wen Hua 5th Road, Kweishan, Taoyuan 33376, Taiwan
Tel: 886-3-3972419 Fax: 886-3-3272156